Structural Infrastructure
Tilt-Up Release Agents


Downloadable PDF’s
727-Platinum
727 PLATINUM Spec
727 PLATINUM SDS
727-Xtra
727-Xtra Specs
727-Xtra SDS
810-Xtra
810-Xtra Specs
810-Xtra SDS
Bond Breaker
Bond-Breaker-Xtra Spec
Bond Breaker-Xtra SDS
Super-Strip-65
Super-Strip-65 Spec
Super-Strip-65 SDS
Super-Strip-AquaBlend
Super-Strip AquaBlend Spec
Super-Strip AquaBlend SDS
Crete-Lease 727-Xtra
The 2nd improved version of Cresset’s original structural release agent. Crete-Lease 727-Xtra is a vegetable oil & mineral oil-based release agent for releasing forms from hardened concrete in structural/infrastructure applications as well as a cost-effective option on certain architectural applications where Crete-Lease 880’s line would be ‘overkill.’ Crete-Lease 727-Xtra provides easy clean stripping with no staining & minimal bugholes when applied correctly. Crete-Lease 727-Xtra is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of the Crete-Lease 727-Xtra can be found in the 727-Xtra specs PDF. Please contact a Fister Inc representative for pricing & technical questions.
Crete-Lease 727-Platinum
Crete-Lease 727-Platinum is Cresset’s newest release agent developed. Crete-Lease 727-Platinum is an environmentally friendly synthetic release agent offering the same performance as the Crete-Lease 727-Xtra with an extremely low VOC level meeting the strictest of VOC level & environmental regulations. Crete-Lease 727-Platinum is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of the Crete-Lease 727-Platinum can be found in the 727-Platinum specs PDF. Please contact a Fister Inc representative for pricing & technical questions.
Crete-Lease 810-Xtra
Crete-Lease 810-Xtra release agent was developed for use without dilution with zero-slump (dry mixed) concrete. Provides for easy stripping on pipe pallets as well as header rings for machine made pipes while also minimizing clean-up of zero-slump mixers & equipment. Crete-Lease 810-Xtra is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of the Crete-Lease 810-Xtra can be found in the 810-Xtra specs PDF. Please contact a Fister Inc representative for pricing & technical questions.
Crete-Lease Tilt-Up Bond Breaker-Xtra
Crete-Lease Bond Breaker-Xtra is a water-based bond breaker for cast concrete slabs to promote the release of ‘fresh’ poured tilt-up wall sections. Created from new ‘green’ chemistry technology Bond Breaker-Xtra contains no solvents, is non-toxic, does not stain, requires almost no stirring, & has an extremely low VOC level meeting the strictest of VOC & environmental regulations. Bond Breaker-Xtra also is resistant to modest rainfall & minimizes water penetration into base slab. Crete-Lease Bond Breaker-Xtra is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of the Crete-Lease Bond Breaker-Xtra can be found in the Bond Breaker-Xtra specs PDF. Please contact a Fister Inc representative for pricing & technical questions.
Super-Strip 65
Super-Strip 65 is an environmentally friendly general purpose release agent consisting of a proprietary blend of vegetable oils in mineral oil. Super-Strip 65 promotes easy form stripping while helping to minimize clean-up of forms & equipment. Super-Strip 65 is ideal for use on most types of plywood & aluminum wall forms. Super-Strip 65 is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of Super-Strip 65 can be found in the Super-Strip 65 specs PDF. Please contact a Fister Inc representative for pricing & technical questions.
Super-Strip Aquablend
Super-Strip Aquablend is the newest version of the Super-Strip release agent series. As the name Aquablend implies, Super-Strip Aquablend is a water-soluble oil concentrate designed to be diluted with water. This concentrate is able to be diluted in ratios of 1 part Super-Strip Aquablend up to 4 parts of water as well as to other dilution ratios in between (i.e. 1 part Aquablend to 1 part water, 1 part Aquablend to 3 parts water, etc.). Super-Strip Aquablend in its concentrate (no dilution with water) meets all federal & state (including CA & OTC states) VOC levels & environmental regulations. Super-Strip Aquablend is available packaged in 5-gallon pails, 55-gallon drums, & 275-gallon totes. Surface Preparation, application instructions, & handling properties of Super-Strip Aquablend can be found in the Super-Strip Aquablend specs PDF. Please contact a Fister Inc representative for pricing & technical questions.