Button Magnets


Button Magnets

Button Magnets are designed for supporting side rails & block outs. The magnet is engaged to steel by impacting the button with the Dead Blow Mallet (or rubber mallet) & is disengaged using the Lifting Handle on the button. Button Magnets are available in 1/2 ton, 1 ton, 2 tons, & 2-1/2 tons holding force with the 1 ton strength having a low profile housing available. Please contact a Fister Inc representative with any technical questions & for a quote.

Description Part Number
1/2 Ton Button Magnet BUT-0.5TBM
1 Ton Button Magnet BUT-1TBM
1 Ton Low Profile Button Magnet BUT-1TLPBM
2 Tons Button Magnet BUT-2TBM
2-1/2 Tons Button Magnet BUT-2.5TBM

 

Bracket for Button Magnet

The Button Magnet Bracket is for using a button magnet to support a wooden form on a steel bed. The Bracket is bolted onto the Button Magnet using the 2 bolts located on top of the Button Magnet’s housing & is screwed to the wooden form. The Bracket is available to fit the 1 ton, 2 tons, & 2-1/2 tons Button Magnet housings. Button Magnets & Button Magnet Brackets are sold separately. Please contact a Fister Inc representative with any technical questions & for a quote.

Description Part Number
Bracket for 1 Ton Button Magnet BUT-1TBMB
Bracket for 2 & 2-1/2 Tons Button Magnet BUT-2TBMB 

Button magnet
w/ Side rail

Button Magnet w/ angle

Dead Blow & Lifting Handle

The Dead Blow Mallet is the recommended tool for engaging the Button Magnet & the Lifting Handle is the recommended tool for disengaging the Button Magnet. Please contact a Fister Inc representative with any technical questions & for a quote.

Description Part Number
Dead Blow Mallet BUT-DBM
Lifting Handle for Button Magnet BUT-BMLH